Summer is a season with a lot of rainy weather, so for the double-shaft shredder, we must do a good job of waterproofing and moisture-proofing it. So, what should we do? First of all, we need to protect the double-shaft shredder well and not let it come into contact with rainwater to avoid rusting. Secondly, we have to protect the wood and try to keep the wood as dry as possible.
When processing raw materials, we will find that the crisp things are easier to shred, the shredding power is higher, and the quality is better, but for the wet things, such as the biaxial shredder, the wet wood is shredded, and the shredded wood is shredded. The power will be lower than with dull wood.
Because the wet material is more easily bonded together when it is shredded, a certain resistance occurs, which affects the shredding effect. And processing these wet things for a long time will corrode the internal parts of the machine and easily rust, which will further affect the processing efficiency.
Therefore, two points should be avoided, one is long-term processing of moist and water-containing materials, and the other is often drenched by rain. Even simple machinery in normal life, such as bicycles, will rust and be damaged in the rain for a long time, so it is the basic knowledge to protect the machine to avoid water. If it is not necessary for a long time, lubricating oil can be applied to key parts such as the shredder bearing to avoid moisture corrosion in the air. In a word, the protection of the machine is a long-term usual work that requires persistence and patience.