Plastic crusher recycling waste plastics can save resources. With the continuous development of my country's economy, more and more social infrastructure is needed, and the demand for plastics is also increasing. However, the current situation of my country's plastic resources is not optimistic, and the degree of external dependence is high. The recycling of waste plastics can contribute to the construction of a sustainable society. Recycling one ton of plastic steel can produce 0.9 tons, which can save 47% of the cost compared with iron ore smelting. At the same time, it can also reduce a lot of air, water, solid waste pollution and so on.
Therefore, whether it is to establish the concept of sustainable development, strengthen waste classification and recycling, waste plastic reuse, or economic and environmental benefits, etc., waste plastic recycling plays an important role.
The plastic crusher industry has made great contributions to the green industry, especially the recycling of plastic resources. The main plastic crusher is mainly because its design advantages are different from similar industries. The large-scale plastic crusher has high efficiency, labor saving and good economic benefits. Nowadays, in order to extend the life of plastic crusher equipment and reduce power requirements, many manufacturers are using it.
The plastic crusher can crush a variety of materials. It has strong crushing capacity, high output, low energy consumption, high efficiency, etc. It uses a powerful source of power with high torque and low speed. It also has a good shredding ability for plastics. It uses excellent Sound insulation technology, low noise, low vibration, and the operation is very convenient and simple.
During the cleaning process of the plastic crusher, to prevent the surface of the shredded parts from being scratched, the oil hole on the bearing box must be unblocked, and then insert gauze or cotton thread into the hole to prevent dust from entering. For example, the center of gravity of pulleys, gears, plastic crusher blades, etc. must coincide with the center of rotation. Otherwise, the plastic crusher is running, which may affect the use of mechanical equipment due to the shift of the center of gravity. After the shredder is completed, tools such as wrenches are left in the tearing chamber. After the power is turned on, the machine is turned on for 3~4 seconds, and the machine runs normally after there is no abnormal sound or vibration.