In recent years, everyone in China has attached importance to environmental protection and low carbon. To a certain extent, it has promoted the development of waste plastic crushers. Each product has its own precautions, which can reduce damage and can be used for a long time. The following explains the precautions of waste plastic crusher:


1. Before starting the waste plastic crusher, turn the rotor by hand to check whether the claws, hammers and the rotor are running flexibly and reliably, whether there is collision in the crushing chamber, and whether the rotation direction of the rotor is consistent with the direction indicated by the arrow of the machine. And whether the plastic crusher is well lubricated.





2. The power unit of the waste plastic crusher should be installed firmly. If the plastic crusher needs long-term fixed operation, it should be fixed on the cement foundation; if the waste plastic crusher needs mobile operation, the unit should be installed on the base made of angle iron, and the power engine (diesel engine or electric motor) and The pulley grooves of the plastic crusher are in the same rotation plane.


3. After the waste plastic crusher is started, it should be kept idling for 2~3min, and no abnormality will be seen before feeding.


4. Pay attention to the operation of the plastic crusher at all times during work. First, feed evenly to prevent blocking the crushing chamber; secondly, do not overwork for a long time. If there are vibrations, noises, excessive temperature of the bearings and the body, or spraying materials, the machine should be shut down for inspection immediately, and the work can be continued after troubleshooting. 2. After installing the waste plastic crusher, check the fastening of each part of the fasteners, and tighten them if they are loose. At the same time, check whether the belt tightness is appropriate.

5. Do not change the belt pulley casually, in case the speed is too high to cause an explosion in the crushing chamber, or the speed is too low to affect the working efficiency of the crusher.