The type of production line of the plastic crusher? The representative product of the vertical crusher, the vertical shaft impact fine crusher, is widely used in the fine crushing of materials in the iron ore, gold mine, cement, glass, ceramic, electric power, and steel industries. First talk about the vertical crusher (that is, the main shaft is vertical). The machine has become a hot-selling product by breaking and replacing mill since its introduction in the 1980s. As a fine crusher, the average output particle size is ≤3～4mm, and 90% is fine powder, which reduces the input particle size of the ball mill and reduces the output. Increased by 20% to 30%.


Horizontal crusher (that is, the main shaft is used horizontally). Its types are: horizontal shaft impact crusher, horizontal shaft hammer crusher, ring hammer crusher, etc. The gap and geometric angle of the jaw crusher can produce all kinds of materials required, and the material Good shape (six prism) and high compressive strength. The structural characteristics of the horizontal crusher are: high production capacity, low energy consumption per unit product, large crushing ratio, replacement of multi-stage crushing, that is, when the process conditions are limited, the model can complete product production from coarse to fine crushing. The whole process.





Plastic crusher (relying on the squeezing and shearing force of rollers for crushing). The main advantages are: simple structure, compactness, light weight, reliable work, convenient adjustment and crushing, and the dryer manufacturer (ie, toothed roller crusher) can be used without foundation to apply it to crushing large pieces of material to small pieces of material (Contains a certain amount of moisture), it is unmatched by other crushers. The disadvantages are: low production capacity, continuous and uniform feeding is required, uneven abrasion on the roller surface, product particle size is not easy to be uniform, and frequent repairs are required. Generally, the roller surface of the roller crusher has two types: fixed and replaceable, and there is also a roller surface with teeth.


The type of plastic crusher production line? In the multi-stage crushing process, after coarse and fine crushing, the desired product is finally formed. This is a common crushing production line. If the output of primary crushing is greater than secondary crushing, or secondary crushing is greater than tertiary crushing, people usually think that primary crushing is good, while secondary crushing and tertiary crushing are not good. In fact, this is not the case, this is a typical selection mismatch that causes the craft to hang upside down. Therefore, when the multi-stage crushing process is arranged, the second bankruptcy volume should be considered slightly larger than that of the first bankruptcy, and so on, so that the process can be smooth. The feeding of the crusher is something that people easily look down on and overlook. The feeding of the crusher is related to the service life and the normal operating cycle of the crusher, and the feeding must be uniformly fed. So be sure to follow the instructions and pay attention to the maintenance and maintenance of the crusher.


Through the appeals, we can see that the products made of plastic shredders have been developed very mature so far. Of course, there are still some, which are already very popular. At that time, most manufacturers still have many recognitions. Machines, such manufacturers still need.