A plastic shredder is a machine used to shred plastic. The structure of the shredder is designed for larger plastic waste such as car bumpers, plastic pipes. The plastic shredder adopts alloy steel blades with long service life. At the same time, the plastic shredder is structurally designed, easy to maintain and clean, double-layer structure, sound insulation material, low noise, and the cutter shaft seat has undergone strict balance debugging.

 

The working principle of the plastic shredder is actually very simple, that is, put the waste plastic into the shredder cavity, use the squeeze of the blade to shred the waste plastic, and the shredded plastic pieces are discharged from the screen under the shredder. When it comes out, the plastic that does not meet the shredding size will be repeatedly broken in the shredding cavity.

When in use, the plastic shredder and power system should be placed on a stable concrete floor.

If the plastic shredder needs to be moved, it should be installed on a base made of angle iron and hold the power machine and the pulley groove of the plastic shredder. on the same plane of rotation. After the plastic shredder is installed, check the tightening of each fastener.

If loose, it should be tightened. At the same time, check whether the belt tension is appropriate. Attention should be paid to the operation of the plastic shredder during work. The feeding should be uniform to prevent clogging of the debris chamber. Do not overload the machine for long periods of time. If there is vibration, noise, bearing, body temperature is too high, and the material is sprayed outward, it should be stopped for inspection.