At present, how to operate the shredders in the world, and how to avoid the problems of further jamming materials. In this situation, how to deal with it and what method can be used to prevent material jam and damage to the machine. In fact, if the shredder is used when the operator does not operate it correctly, it is very easy to jam and damage the machine.


According to the size of the crushed material or the crushed material, the crusher can be divided into coarse crusher, medium crusher, fine grinder, and superfine grinder. There are four types of external forces applied to the solid during the crushing process: rolling, shearing, impact, and grinding. Press-rolling is mainly used for coarse and medium crushing, suitable for the crushing of hard materials and bulk materials; shearing is mainly used for fine crushing, suitable for the crushing of tough materials; impact is mainly used for medium crushing, fine grinding, superfine grinding, and suitable It is suitable for the crushing of brittle materials; the grinding is mainly in fine grinding and ultra-fine grinding, suitable for the crushing of small pieces and fine particles.





The pulverizer is a machine that pulverizes large-size solid raw materials to the required size. According to the size of the crushed material or the crushed material, the crusher can be divided into coarse crusher, medium crusher, fine grinder, and ultrafine crusher. There are four types of external forces applied to the solid during the crushing process: rolling, shearing, impact, and grinding. Press-rolling is mainly used for coarse and medium crushing, suitable for the crushing of hard materials and bulk materials; shearing is mainly used for fine crushing, suitable for the crushing of tough materials; impact is mainly used for medium crushing, fine grinding, superfine grinding, and suitable It is suitable for the crushing of brittle materials; the grinding is mainly in fine grinding and ultra-fine grinding, suitable for the crushing of small pieces and fine particles.


Many operators basically follow the SOP. It is very easy to damage the machine, especially using some small plastic shredders to break the lumpy nozzle material, which is very easy to damage the machine. In the face of such a blocky nozzle material, it is necessary to use a machine with a higher horsepower, so as to ensure the normal working state. So this point is very important, it directly protects the plastic shredder and ensures that the shredder will not jam again. This also protects the tool to a certain extent.