1. The small plastic crusher should prepare special tools for repairing the plastic crusher, and check whether the connection of each part of the equipment is intact;

2. Whether the power plug is extruded, the dirt around the engine must be cleaned and tidy, and the coal tunnel bolt support of the mechanical equipment must be intact and strong. This needs to be checked and solved before starting, or it is very It is easy to happen and cannot turn off the equipment immediately;

Third, the status of the halfway inspection. When the plastic crusher manufacturer is finished, the coal in the crusher must be pulled out, and the tail rudder and the overall fuselage should be cleaned and clean. The key is to switch the magnetic starter power switch Hit your hand into the power-off part so that you can end it.

The brand advantages of plastic crushers are mainly:
1. Choose high-quality reducer, the equipment characteristics are more stable, the service life is longer, and the transmission torque is large.

2. Blocked automatic operation and alarm, plastic crusher manufacturers can automatically calibrate the operation after eliminating the blocked thick material.

3. Selecting the integrated design plan of tooth knife and claw knife, coarse crushing and fine crushing can be carried out at the same time, and new material mixing applications can be developed immediately.

4. Design plan without stainless steel screen, the broken particles are well-proportioned, and the powdery ingredients are few.

5. The unique method of rack and pinion transmission system, the operation is more stable and the noise is lower.

6. The structure is conscientious and meticulous, saving indoor space, cleaning and saving time and effort.

7. The material input box is made of visible material window, thick steel plate welded by electric welding, solid structure and low cost.