1. Manufacturers of plastic shredders should pay attention to safety fire protection and ensure that fire extinguishers are placed around the granulator equipment.

2. It is forbidden for irrelevant workers to communicate with machine and equipment operators, and only one person is allowed to actually operate the button commands on the motor control panel.

3. Check the actual effect of the insulation layer of the cable power circuit on time, and always pay attention to the warning content on the equipment sign. When common faults or abnormal conditions occur, it must be reported to the relevant staff, and the maintenance personnel will carry out the solution. If an abnormal situation that affects safety is found, immediately press and hold the emergency stop button.

4. The actual operation of the small plastic crusher single-screw extruder plastic granulator should use gear oil with cleanliness, viscosity and other indicators that meet the requirements, and provide the water cooler with sufficient total flow of cooling circulating water in accordance with the regulations. Anti-hydraulic systems and pipelines are blocked or leaked due to environmental pollution or high temperature of the hydraulic oil. The extruder should fill the reducer with grease that meets the requirements.

5. Large-scale plastic crusher single screw extruder plastic granulator should strictly follow the safety operating regulations during actual operation, and illegal operations should not be carried out in non-practical operating procedures. To ensure the stability of safety equipment, safety protection measures should not be used to destroy equipment in pursuit of perfection and high efficiency. Avoid all factors causing equipment damage and safety accidents.