What factors should be paid attention to when adding hydraulic oil to the shredder? The shredder uses the principle of high force distance and low speed, and is driven by the reducer. It can shred a variety of materials that are difficult to shred. The disc adopts the combined structure of fixed knife and movable knife, and adopts meshing cutter head, which can completely shred various domestic garbage. The cutter head of the shredder needs to use special alloy material, which has good wear resistance and can shred a lot of materials. , The structure is compact, the production process is relatively stable, the whole machine can make the work of the shredder easier through automatic operation, the noise is small and pollution-free during the shredding process, and it is a new type of green environmental protection equipment.

The shredder mainly relies on the hydraulic system in the working process. When the shredder is working, some impurities will always enter the inside of the equipment, which will cause trouble to the normal operation of the equipment. Take preventive measures early to save more time for the normal operation of the shredder. When adding hydraulic oil, the shredder should check whether the hydraulic oil is clean, because some solid and hard impurities can easily enter the hydraulic system through the hydraulic oil. There is a phenomenon of desquamation, and a filter device should be used when adding hydraulic oil, so that even if there are some hard impurities that are difficult to find, they will not be found due to the existence of the filter screen. A good environment prevents impurities from entering and causing cleaning troubles.