Recently, with the rapid development of the plastic products industry, some waste items are often produced in the production process, so many manufacturers need to consider how to recycle these waste items. Some factories manually saw some waste pipes into small pieces and then broke them. In this way, the recovery rate is very low. What should be done to solve these problems? You might as well try using a plastic shredder.

How to economically and effectively recover large-caliber PE plastic waste has become a key research topic for PE plastic manufacturers. Before starting the plastic shredder, it is necessary to strictly inspect whether the installation of each part of the machine is suitable for the requirements, whether the screws and bolts are loose, and try to rotate the belt by gently pulling the belt with hand, and whether there is any phenomenon such as collision with the shell. At the same time, the rotating target is inspected, and it is strictly forbidden to crush flammable and explosive materials to avoid incidents.

In the production of plastic shredder equipment, the average blanking should be maintained to ensure the crushing quality and normal production. At the same time, it is strictly prohibited to overload the motor to ensure the normal operation of the machine. The plastic shredder usually pays attention to the inspection of the fastening and looseness of each part, and at the same time, it should pay more attention to the inspection of the wear condition of the wearing parts.

Due to the high speed of the plastic shredder, in addition to the precise and stable installation, it should also maintain excellent smoothness to maintain the normal operation of the machine. It is normal that the bearing temperature does not exceed 70 degrees under normal conditions. Add butter and molybdenum disulfide to the main bearing of the shredder once a week. The source suggests that adding high-speed butter is more effective.